Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Dynex DX-LCD32-09 No picture just sound    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
ntehicks



Joined: 25 Mar 2009
Posts: 162
Location: Herriman, Utah

PostPosted: Fri Mar 30, 2012 3:55 pm    Post subject: Dynex DX-LCD32-09 No picture just sound Reply with quote

I have a Dynex DX-LCD32-09 that no longer shows a picture. I have opened the TV and have removed the inverter board. I started by testing the secondary windings on all 14 transformers. Transformer 302,104,103,102,101 all have open windings. The strange thing is the someone is selling a non working inverter on Ebay. I asked him to test his inverter and the exact same transformers are open on his board to.
could this be caused by a certain part that has gone bad.
Google

PostPost subject: Advertisement

ntehicks



Joined: 25 Mar 2009
Posts: 162
Location: Herriman, Utah

PostPosted: Mon Apr 16, 2012 1:10 pm    Post subject: Novice Reply with quote

So turns out that the transformers are supposed to be connected that way. I purchased the broken inverter board off of eBay and proceeded to remove what I thought was the good transformers and install them on the board that had all of what I thought was the bad transformers removed. The good transformers still showing open.
when I thought all hope was lost, I located this small circuit on the inverter that had another fuse and such. turns out that fuse was blown and replacing it now the TV works. I now have two working units. I guess I have a spare. but the TV now has worked for several days with out any issues. I hope this will help someone.
vwmeche94



Joined: 28 Nov 2012
Posts: 1
Location: Louisiana

PostPosted: Wed Nov 28, 2012 7:22 am    Post subject: DX-LCD32-09 "Ghosting" Screen Reply with quote

Hello,

I know this thread is a several months old, but I have the same problem.

Would anyone kindly post up a picture of the small circuit and fuse referred to by ntehicks?

Thank you
ntehicks



Joined: 25 Mar 2009
Posts: 162
Location: Herriman, Utah

PostPosted: Sun Dec 09, 2012 11:17 pm    Post subject: Dynex Inverter board Reply with quote

I will send you the pictures if you will PM me.[/img]
tomr8888



Joined: 30 Jan 2013
Posts: 1
Location: Columbia, MO

PostPosted: Wed Jan 30, 2013 8:57 pm    Post subject: DXLCD32-09 no pic either Reply with quote

I have the same issue on my DXLCD32-09 and replaced the power supply and that wasn't it. If it is a simple fuse on the inverter board I would love to see that pic too ntehicks. Have tried to figure out how to PM but can't figure out how to. I'm sure they would notify me if you sent it to me in a PM
Google

PostPost subject: Advertisement

kuhurdler



Joined: 28 Dec 2006
Posts: 2862
Location: Overland Park, KS

PostPosted: Tue Feb 05, 2013 8:14 am    Post subject: Reply with quote

This board intentionally does not have Private messaging capabilities for 2 reasons.
1. It is our intent to leave a repair trail behind for others to follow.
2. spammers were trying to register and PM everyone with enormous amounts of spam, making the PM feature essentially useless.
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com