Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Emerson LC320EM2 - won't turn on    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
jtone



Joined: 14 Aug 2015
Posts: 2

PostPosted: Fri Aug 14, 2015 5:21 pm    Post subject: Emerson LC320EM2 - won't turn on Reply with quote

Model No: LC320EM2

My daughter was watching TV one day when the power went out for a few seconds and the TV wouldn't come back on after that. It sat for some time after that until I was able to research it. I found a video on YouTube of a guy doing a repair on a TV with the same problem and he recommended a power supply repair kit from shopJimmy for $20. I tested all of the parts listed in the kit and they were dead. I don't know how to do that kind of soldering so I had my husband's cousin do it and replace all of the pieces from the kit. I got the board back home, hooked everything back up, plugged it in and nothing happened. I waited about 20 seconds and pressed the power button again and the fuse blew immediately.

Any ideas what could still be the problem? It was a fairly cheap TV, but I'm still annoyed that it broke since we didn't watch it often.
Google

PostPost subject: Advertisement

JTS1957



Joined: 21 Jan 2009
Posts: 2237
Location: Far, Far Away

PostPosted: Fri Aug 14, 2015 11:14 pm    Post subject: Reply with quote

LC320EM2 you tube = About 2,380 results (0.30 seconds)

Care to narrow that down some ...
jtone



Joined: 14 Aug 2015
Posts: 2

PostPosted: Sat Aug 15, 2015 6:46 am    Post subject: Reply with quote

Part 2 of the video repair: https://www.youtube.com/watch?v=nQHWrJJg4Mc



The kit I bought: http://www.shopjimmy.com/emerson-a17fdmpw-001-power-supply-component-repair-kit.htm
JTS1957



Joined: 21 Jan 2009
Posts: 2237
Location: Far, Far Away

PostPosted: Sat Aug 15, 2015 9:12 am    Post subject: Reply with quote

At least two possibilities:
1) One or more parts in kit may have been installed incorrectly (for example: a part mounted backwards, wrong diode in wrong location).
2) Something else is still bad that parts kit didn't encompass.

Also: http://imgur.com/qXOWDFi
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com