Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Finding RGB input on RF only TV    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
Jpx72



Joined: 09 Jan 2017
Posts: 2
Location: Slovakia

PostPosted: Mon Jan 09, 2017 11:38 am    Post subject: Finding RGB input on RF only TV Reply with quote

Hi all!
I am having a hard time figuring out where to connect RGB input into an old Sharp TV with only RF input.
Anybody have a schematic for this model?
11" colour TV from Sharp with designation:
C-1004SPO Solid state colour TV
It's an old "portable" TV with dual PAL/Secam norm.
Here is the photo of the TV label:
http://imgur.com/a/fr6sA
Thank you for any hint!
Google

PostPost subject: Advertisement

JTS1957



Joined: 21 Jan 2009
Posts: 2328
Location: Far, Far Away

PostPosted: Mon Jan 09, 2017 1:15 pm    Post subject: Reply with quote

A rather expensive solution HERE.

Shipped to Slovakia?
Jpx72



Joined: 09 Jan 2017
Posts: 2
Location: Slovakia

PostPosted: Tue Jan 10, 2017 1:58 pm    Post subject: Reply with quote

Thanks but no, I am not looking for a converter when I have RGB signal ready, and the input point is somewhere on the board.
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com