Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Insignia NS-P42Q-10A Thin line    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
gordonb



Joined: 18 Sep 2011
Posts: 3
Location: florida

PostPosted: Sun Oct 09, 2011 3:40 pm    Post subject: Insignia NS-P42Q-10A Thin line Reply with quote

Hi. I recently purchased an Insignia NS-P42Q-10A (samsung guts). It had sound but no picture. I found a burnt chip on the y-buffer. Changed y-buffer. Tv now working fine except for a small vertical line on the screen. The line is about 1/16 inch wide and is only visible on the upper half of the screen. The bottom half of the screen is fine. It changes color depending on the picture on the screen but is red when the screen is dark and green when the screen is light but can vary in color also so that sometimes it is hard to see. I would really like to get rid of this line as I cant stop staring at it and am sure it cant be good for the screen. Does anybody have any ideas? The y-buffer seems to control left to right bars. Could it be something with the x-buffer? Money is tight so the less parts I have to repair the better. Any help would be very much appreciated. Thanks
Google

PostPost subject: Advertisement

Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com