Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
MLT668T-L1 rev.A power board    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Thu Nov 02, 2017 12:07 pm    Post subject: MLT668T-L1 rev.A power board Reply with quote

Hi folks, I'm new here and desperate Mr. Green
I have been looking for information on the MLT668T-L1 rev.A power board that is in my 32 " LCD TV.
Anyone got the schematic? I need to know the value of a couple of resistor that blew up.
Help anyone? Mr. Green
thanks
Google

PostPost subject: Advertisement

JTS1957



Joined: 21 Jan 2009
Posts: 2344
Location: Far, Far Away

PostPosted: Thu Nov 02, 2017 8:09 pm    Post subject: Reply with quote

I found this. Don't know how close they may be to yours.
Resistors, like fuses, don't usually 'blow up' for no reason.

https://elektrotanya.com/megmeet_mlt668_rev.1.5_power_supply_sch.pdf/download.html
http://www.shopjimmy.com/megmeet-mlt668tl-power-supply-unit-1.htm#
marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Fri Nov 03, 2017 1:13 am    Post subject: Reply with quote

Hi, yes they blow up for a reason and I know that reason I was there when my cat passed near the back of the TV left open for testing. It was a matter of a split of a second and....boom-bim-bang ( nothing that dramatic fortunately ) Mr. Green
All good at the end, no injuried but the TV and precisely 5 resistors on which the marking went off and are unreadable.
BTW I had already this
https://elektrotanya.com/megmeet_mlt668_rev.1.5_power_supply_sch.pdf/download.html
doesn't help and I get "access denied" to
http://www.shopjimmy.com/megmeet-mlt668tl-power-supply-unit-1.htm#
any other link or suggestion?
Thanks
JTS1957



Joined: 21 Jan 2009
Posts: 2344
Location: Far, Far Away

PostPosted: Fri Nov 03, 2017 2:26 am    Post subject: Reply with quote

Are these resistors on the top or back of the board?
There doesn't appear to be much in regards to resistors in the TOP view of Shop Jimmy board, unless a heat sink is blocking my view.
The BACK view shows MANY surface mount resistors with well-labeled location numbers and can make out some part values.
https://imgur.com/a/1jywE
marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Fri Nov 03, 2017 2:48 am    Post subject: Reply with quote

They are on the back, smd. I can still see the part number on the board but not the value since it is on the resistors .
There's nothing on that link.
https://photos.app.goo.gl/wuHcujQyV65xN2U43[/url]
Google

PostPost subject: Advertisement

marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Fri Nov 03, 2017 2:49 am    Post subject: Reply with quote

https://photos.app.goo.gl/wuHcujQyV65xN2U43
JTS1957



Joined: 21 Jan 2009
Posts: 2344
Location: Far, Far Away

PostPosted: Fri Nov 03, 2017 2:52 am    Post subject: Reply with quote

If you give part location numbers ... I'll see if I can make out.

Last edited by JTS1957 on Fri Nov 03, 2017 3:10 am; edited 1 time in total
JTS1957



Joined: 21 Jan 2009
Posts: 2344
Location: Far, Far Away

PostPosted: Fri Nov 03, 2017 3:03 am    Post subject: Reply with quote

Got it.

They appear to match the resistors shown at those locations on tanya schematic.

R64 / 60 / 58 / 55 / 53
marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Fri Nov 03, 2017 6:30 am    Post subject: Reply with quote

OK, let me have a look....
marco.brusca



Joined: 02 Nov 2017
Posts: 8

PostPosted: Fri Nov 03, 2017 6:59 am    Post subject: Reply with quote

Yep, there they are!!Hopefully they didn't change from rev.A.
Thank you very much JTS1957, I'll replace them and let you know Laughing
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com