Riddled TV Repair Forum
Service Menu and Manual Schematics
 
   
 FAQFAQ   SearchSearch   RegisterRegister 
   Log inLog in 
Philips pfl6008 [QFU1.2E] - not starting from standby mode    
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair
 
Author Message
wilhelmhell



Joined: 11 Nov 2016
Posts: 2

PostPosted: Fri Nov 11, 2016 2:54 pm    Post subject: Philips pfl6008 [QFU1.2E] - not starting from standby mode Reply with quote

Hello everyone,

I have 47pfl6008 to repair. Tv doesn't turn on, it's in standby mode but no diode and no reaction to remote/buttons. I've checked psu and it's ok. However ssb is not driving standbyn signal it looks like fusion cpu is dead. Power regulators also ok. There are 2 epoxy covered chips on ssb board which I cannot identify in schematic/pcb - maybe they are corrupted, it's impossible to check. I have heatten up a little cpu to check if there could be broken bga connections but it gave nothing. Anyone knows such issue and can help?

Best regards
Google

PostPost subject: Advertisement

wilhelmhell



Joined: 11 Nov 2016
Posts: 2

PostPosted: Thu Dec 01, 2016 12:15 pm    Post subject: Reply with quote

Hi All, I've solved problem by reflashing spi flash. Subject closed.
kuhurdler



Joined: 28 Dec 2006
Posts: 2846
Location: Overland Park, KS

PostPosted: Thu Dec 01, 2016 3:58 pm    Post subject: Reply with quote

Thanks for posting back. Glad you got it working.
Display posts from previous:   
Post new topic   Reply to topic    Riddled TV Repair Forum Index -> TV Repair All times are GMT - 6 Hours
Page 1 of 1

 


Disclaimer: All information provided by RiddledTV is strictly for information purposes only. Please observe all warnings displayed on your electronic
devices. This information should only be used to help diagnose work, and all service should be performed by a qualified technician.
Contact Us       Privacy Policy       Copyright © 2015 RiddledTV.com       Advertise on RiddedTV.com