Riddled TV Repair Forum

I've located an original remote. I've gone to the on screen convergence adjustments and tried to adjust the crosshairs. They don't seem to move at all. I've gone into the service menus and tried to ...

Seems the original had a 'Video' button.....can't seem to find that on any universal ones I have. I suppose the search will be on for an original remote.

Thanks so much for your help!
I'll be bac ...

http://www.riddledtv.com/forums/images/userposts/t145/convergence.jpg

I took my time and completely reassembled the convergence pcb when replacing both ICs again. Upon power up, I have a picture again!
When I first attempted the repair on this, I had the hourglass eff ...

Thanks, Kuhurdler for your help last year. I was quite distraught and shelved this project after my repair attempt, but a few days ago I decided to revisit what I had done. I failed to include (at t ...

Well, I soldered in the 2 new convergence IC chips and powered the set up. Without an antenna, all I could see was 'snow', but I did notice not nearly as much hourglass or distortion on the edges and ...

Thanks for all of your help! I ordered from the link you provided in the earlier post and I expect them to arrive mid week. Once I get them in I'll let you know what happens!
The entire chassis is ...

I will gently pry on the connectors. If that doesn't work I'll get another set of pictures put up. Are these convergence chips prone to failure because of faulty design and/or the heat sink setup us ...

I removed the metal cover screwed to the far left heatsink and there they are! 2 ICs labelled STK 392-110!
There are several connectors that will pull out of their sockets easily, however, 2 of the ...

I will see about removing those heatsinks for access.
Thanks for your time!