ACME Enterprises      
 
Advertise Here Nothing to See Here, Move Along   

Welcome









CTC197
CTC195


Model Chassis Symptom Problem Description Fix
- CTC195 convergence cannot converge, no power on conv board R19702= 750k, R19703= 750k
- CTC195 convergence cannot converge, no power on conv board Replace U19700, STK730-130
PTK195 CTC195 OSD OSD rolls CR14703, CR14705 next to flyback
P60820BL PTK195DC
CTC195DC
Dead clicks 4 times (click click click click) replace flyback (used generic HR8551)
- CTC197 Video No Video after replacing Flyback Place small jumper between Pin 7 and Pin 8 on JC12128
- CTC197 Dead dead, clicks 3 times (tick tick tick) replaced flyback transformer
- CTC197 Tuning Would not tune channels 7-13 Replace C17713
- CTC197 Audio No Audio C11630= 4.7uF/35V
- CTC197 Dead Dead, Repeat failure of regulator R14125, R14145, R14146, U14101, Q14101
- CTC197 Dead Intermittent dead Resolder L18106
- CTC197 Dead Dead, raw B+ is OK, no regulated B+ R14145= 270k
- CTC197 Dead Dead, Squeals when plugged in CR14402, Q14802
- CTC197 Dead Blows Q14010 when plugged in R14111= 360k resistor
- CTC197 Dead Dead, clicks 3 times, HOT is OK R14305= 3.6k, Flyback xfmr
- CTC197 Dead Dead R14125= 36 Ohm
- CTC197 Shutdown Flyback Arcing to Core, shuts down Replace Flyback, R14407= 82k .5W, C14410= .001uF/2kV
- CTC197 OSD OSD rolls intermittently Q14503= 215495
- CTC197CH Dead clicks, no pic or sound Flyback= #237506, R14305= 5.6k/3W
G36695LVYX1(CL) CTC197CL Audio Intermittent pop in audio Replace mute Transistor Q11900
G36705YX1(CL2) CTC197CL2 Tuner Channels 15, 16 and 17 tuned to the same channel Replace C17119
G36705YX12(CL5) CTC197CL5 Video No video on tuner or S-Video Replace L18110
PS36500YX1(CM) CTC197CM Power Supply Totally Dead Set Replace CR14107
F32685YX1(CN) CTC197CN Video Weak Video, intermittent vertical rolling Replace C26924

Your Model Not Listed Here? Search for it in our Forums

or

Return to Main Repair Tips



DISCLAIMER

This website is for information purposes only. RiddledTV.com and its affiliates are not responsible for damage to your equipment, ego, blown parts, county wide power outages, planetary disruptions, or personal injury that may result from the information provided here.