| Size |
Model |
Chassis |
Symptom |
Problem Description |
Fix |
| 36 | CT35G21UNA5 | | Power | Intermittent shutdown, then powers on | Resolder relay |
| 36 | CT36G24A | | Video | Dark Pic, increasing G2 doesn’t help | C354 (on CRT board, .001/2kV) |
| 36 | CT36HL53G | | Video | horizontal width pulled in with foldover on right | C521 (.22uF/200V) |
| 36 | CT36HX41E | | Video | Picture shifted to right 4 inches | replace Q755 and C521 |
| 36 | CT36SL13 | | Video | Dark picture after power outage | menu settings corrupted. Hold action and power buttons for factory reset |
| 36 | CT36SW31 | | Video | bad or no pin correction | C524, C755, C757, R517, R246, R517, Q702. |
| 36 | CT36SX31 | | Video | pic shifted to right with a bow on left side with black bar | Bd TNP2AH026S |
| 36 | CT36SX31 | | Video | pic shrinks and loses color as set warms up | C832 (220uF/16V) |
| 40 | PT40LC12 | LCD | Power | Filter clogged after replacing it, and unit shuts off | Verify voltage using service jig #LSYF0532. If in range of 70 to 111,unit is OK. If lower than 70, reset the adjustment. |
| 40 | PT40LC12 | LCD | Power | no power up, LED blinks 2 times | Lamp cover switch (LSEP3052A) |
| 40 | PT40LC12 | LCD | Power | shuts down, ballast smells burnt | replace bad lamps, and new ballast |
| 40 | PT40LC12 | | Lamp | Resetting the lamp Timer after lamp replacement | Turn the TV on. Press and hold the volume down button on the front panel. Press the remote control?s PIP/VTR button in at the same time. After 10 seconds, it will reset |
| 40 | PT40LC12 | | Power | Unit shuts down after 2 minutes, LED blinks 3 times | R2901, R1211 |
| 40 | PT40LC12 | | Video | dark screen | replace bulb |
| 42 | TH42PA20U | | Power | intermittent shutdown, LED blinks 5-7 times | IC551 (#C5HABZZ00123) |
| 42 | TH42PZ77U | Plasma | Dead | Dead, 7 blink code | Replace SC board or check transistors Q641 through Q654 |
| 43 | PT43LC64 | | Service Mode | can't exit service mode | press RECALL twice. Press and hold volume down on the TV and the recall button on the remote for 5 seconds |
| 43 | PT43LCX64 | | Video | Pic solarization | Cable (#LSJA0467) |
| 45 | PT45LC12 | LCD | Power | Shuts down, ballast smells | replace lamp and ballast |
| 45 | PT45LC12 | LCD | Power | shuts down within 5 minutes | P2305 connector, may just need to be reseated |
