| Size |
Model |
Chassis |
Symptom |
Problem Description |
Fix |
| 15 | LTN1535 | LCD | Power | Dead | C109 (1000uF/16V) |
| 17 | LTN1765X | LCD | Dead | Power light blinks, but won't turn on | C21, C43, C53, C54, C55, C57, C4276 (all 10uF/16V) |
| 25 | TXG2547 | | Vertical | Vertical Circuit had dry solder connection | Resoldered Vertical IC |
| 27 | TXT2782QX | | Power | Blows Fuse | Replace PT802S with a 4.5ohm thermistor (#1404-001154) |
| 30 | TX-R3079WHX/XXA | | Dead | Dead, Fuse blown | Change Thermister and fuse (1404-0012776) |
| 32 | TXN3298HFX | | Power | Set shuts down intermittently | Resolder flyback pins |
| 40 | LN0S4051D | LCD | Power | Won't turn on, clicks repeatedly | C115 and C123, or just replace power supply (BN96-03775A) |
| 42 | HLR4266WS/XAA | DLP | Video | Single pixel width vertical ines on all video inputs except OSD | Replaced DMD board |
| 42 | HLR4266WX/XAA | DLP | Video | Single pixel width vertical ines on all video inputs except OSD | Replaced DMD board |
| 42 | HLS4266W | | Power | shuts down intermittently | door switch cover not fully closed, check switch operation |
| 42 | HPR4252C | | Video | YSUS module failure | YSUS (996500032643, LJ92-01200A) |
| 42 | PPM42S3 | Plasma | Video | No picture, but has sound | power supply (BN96-00249A) or C524=C525 (0.22uF/400V mylar) |
| 43 | HLM437W | L2 | Power | Timer, lamp and temp LEDs blinking | replace ballast and lamp assemblies |
| 46 | HL-R4667W | | Video | Green bars in pic, and pic mostly green | replace digital module |
| 46 | HLR4656WX/XAA | DLP | Video | Single pixel width vertical ines on all video inputs except OSD | Replaced DMD board |
| 46 | HLR4667WX/XAA | DLP | Video | Single pixel width vertical ines on all video inputs except OSD | Replaced DMD board |
| 46 | HLR4677WX | DLP | Video | Single pixel width vertical ines on all video inputs except OSD | Replaced DMD board |
| 47 | HCL4715 | | Power | Dead, Q473 shorted | Q473 (#AA96-0037A), HV block |
| 50 | HLN5065WX/XAA | | Video | Diagonal herringbone type interference appearing in all inputs | Defective digital pcb. Remember on these models, both the digital and analog PCB?s must be replaced at the same time. |
| 50 | HLN507WX/XAA | | Video | Diagonal herringbone type interference appearing in all inputs | Defective digital pcb. Remember on these models, both the digital and analog PCB?s must be replaced at the same time. |
