| Size |
Model |
Chassis |
Symptom |
Problem Description |
Fix |
| 13 | A13P02D | | Dead | Dead, No Relay Click | D802 (1N4148), R416 (2.2ohm/1W) |
| 13 | TVBR1302Z | Combo | Dead | Dead | IC502 (AN7605p), C515 (10uF/100V) |
| 25 | B25A11Z | | Video | No color | ICX2200 (TA1268N) |
| 25 | MWM2553Y | | Video Smeared | Video Smeared including OSD | Q5104 on CRT board |
| 25 | SY25687 | 9-1407 | Dead | Won't start | R3499 (surface mount 100Ohm) |
| 25 | Z25A11S | 9-1790 | Dark Picture | Picture is washed out, and CRT Zenith CRT A68AGD01X tests bad cutof on blue color using Sencore CR-70; | Replace CRT |
| 27 | J0920X | Hotel | Squeal | High Pitch Squeal even with audio muted | C1462 (47uF/25V) |
| 27 | SG2767 | BD9-986 | Audio | No Audio | Q801 (121-975A) |
| 27 | SM2789 | 9-1268 | Power | Dead | CR3409 |
| 27 | SS2712VK | | Audio | no sound | Q801 |
| 46 | PVY4665DT | | Vertical | 3 bowed horizontal lines | R3243, R3244 |
| 50 | A50M91W | | Video | No Pic, Sound OK | Flyback (#95-4134-19), QX3200 (HOT,2SD1880), QX3402 (K790,FET Regulator ECG2394), CRX3412 (ECG580) |
| 50 | A50M91W1 | | Convergence | after 15 minutes, the convergences is no good | R3243 (110kohm/.5W), R3244 (82kohm/.5W) |
| 52 | D52WLCD | LCD | Power | Dead, or intermittently won't start | Replace power supply or troubleshoot capacitors |
| | | 9-1130 | Power | No pic or audio | IC6300 |
| | | 9-1269 | Video | no video, turning up G2 reveals vert collapse | QX3404 (#121-1102) |
| | | 9-1269 | Video | No vertical deflection | IC2100 (#LA7838), R3245, CX2110 (100uF/35V) |
| | | 9-1270 | Video | Horizontal Deflection intermittent | Resolder LX3202 (back right corner of deflection board) |
| | | 9-1270 | Video | no HV, but has audio | QX3403 (#121-1301) |
| | | 9-1270 | Power | shuts down intermittently after replacing flyback (#95-4134-09) | Change CRX3204 from 9.1V Zener to 12V Zener |
